AT&T Merlin II Release 3 System Manual page 168

How to Program
1 Label a button (one with lights is preferred but
not required).
2 Enter programming mode by sliding the T/P
switch to P. (Digital phoes: Dial #33.)
3 Press the button you want to program.
4
Dial *91 plus an intercom number.
5 Program another feature or leave programming
mode by sliding the T/P switch to the center
position. (Digital phones: Dial #00.)
How to Use
To transfer a call using an Auto Intercom button:
1 With the call in progress, press the Auto Intercom
button for the intercom number to which you
want to transfer the call.
2 Press Speakerphone or hang up.
To transfer a call by dialing an intercom number:
3 Press Transfer.
4 Dial the intercom number of the person to whom
you are transferring the call.
5 Press Speakerphone or hang up.
T announce a call before transferring it:
O
1 Press Transfer.
Press Intercom-Voice.
2
3 Dial the intercom number of the phone to which
you want to transfer the call.
4 Announce the call through your handset.
5 Press Speakerphone or hang up.
To screen a call before transferring it:
1 Press Hold.
2 Press Intercom-Ring.
3 Dial the person's intercom number.
4 Announce the call when the person answers, and
ask if it will be accepted.
5 Take the appropriate action.
Press the call's line button and advise the
caller that the person isn't available.
Transfer the call.
6 Press Speakerphone or hang up.
(Continued)
MERLIN II System Features 3-139