Network Connectivity - Lucent Technologies CentreVu Explorer II Version 1.0 Installation Manual

Introduction
Installation Dependencies

Network Connectivity

The Appendix in this guide provides additional network connectivity assistance in
connecting CentreVu Explorer II to your local area network (LAN) or wide area
network (WAN). In particular, these instructions pertain to the administration of the
*
Microsoft Windows NT
Note:
Refer to the Microsoft software support manuals and your network
administrator for further assistance.
This section provides some suggestions for connecting to the network, however, the
LAN, the WAN, and troubleshooting the LAN or WAN are the customer's
responsibility.
CentreVu Explorer II requires a transmission control protocol/internet protocol
(TCP/IP) connection to the CentreVu CMS through a LAN or WAN. The TCP/IP
LAN or WAN connection is necessary so that the CentreVu CMS can transfer
external call history data to the CentreVu Explorer II server. This same LAN or
WAN connectivity allows client workstations to access CentreVu Explorer II
through a web browser when using:
l
DEFINITY Communications System switch to CentreVu CMS—Standard
CentreVu CMS connectivity.
l
CentreVu CMS to CentreVu Explorer II—LAN or WAN connection
running TCP/IP with file transfer protocol (FTP) active. The CentreVu CMS
must be running a software module that allows transmission of External Call
history files for a local area network.
l
CentreVu Explorer II Server to Client—LAN or WAN connection running
TCP/IP.
*Microsoft is a registered trademark of Microsoft Corp.
†Windows NT is a registered trademark of Microsoft Corp.
CentreVu Explorer II Version 1.0 Installation for Windows NT
†
Server 4.0.
1-19
1