Software Download - D-Link DFE-2624 - Hub - Stackable User Manual

Community This is the SNMP community name to authenticate the receiving of
traps.
Delete This will remove a trap receiver from the trap receiving table.

Software Download

The Software Download screen allows you to cause an immediate update of the hub's
parameters and/ or firmware.
The fields are described as follows:
Software Update Mode
whether the configuration file should be obtained through the Ethernet network or
through the console port.
Software Update Control Determines whether or not the Hub should download
its configuration file the next time the Hub is booted.
Boot File The path and configuration file name on the TFTP server. If you are
using bootp-tftp mode, or if Get IP From BOOTP Server is enabled, the pathname
will be obtained from the BOOTP server.
network
Set to either
out-of-band
or . Determines
5