Dmd; How To Select - Barco SLM R12 Owner's Manual

FIB
Formatter interface board

How to select?

1. Push the cursor key ↑ or ↓ to highlight I2C.
DIAGNOSIS
I2C

DMD

SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-40
2. Press ENTER to select.
The I2C Diagnosis overview will be displayed.
If the indication behind the hex code is green, everything is ok.
If the indication is red, something is wrong with that indicated address.
I2C DIAGNOSIS
MOTOR DRIVER 1AH ###
LIGHT SENSOR 1CH ###
LPS 20H ###
SMPS 30H ###
FIB 34H ###
Red DMD 34H ###
Green DMD 36H ###
Blue DMD 38H ###
PMP 4AH ###
Select with ↑ or ↓
<EXIT> to return.
Menu 9-41
9.15.3 DMD
How to select the overview?
1. Push the cursor key ↑ or ↓ to highlight DMD.
DIAGNOSIS
I2C
DMD
SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-42
2. Press ENTER to select.
An overview of the working of the DMD's will be displayed.
DMD
STATUS RED OK
STATUS GREEN OK
STATUS BLUE OK
<EXIT> to return.
Menu 9-43
R5976654 SLM R12+ 27/01/2005
9. Service Mode
127