Table of Contents
Advertisement
3. Installation Guidelines
Formulas for TLD lenses
TLD(0.8:1)
TLD(1.2:1)
TLD(1.6–2.0:1)
TLD(2.0–2.8:1)
TLD(2.8–5.0:1)
TLD(5.0–8.0:1)
3.7.4
Lens Installation
How to install ?
Follow the next procedure:
1. Remove the foam rubber in the opening of the lens holder.
2. Take the lens assembly out of its packing material and remove the lens caps on both sides.
3. Move the handle (A) of the lens anchor system to the right.
Image 3-18
Lens installation
4. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector
on the lens block (B), until the lens clicks in the lens anchor system.
24
Metric formulas (meter)
PD=0.77xSW+0.05
PD=1.11xSW-0.01
PD
=1.47xSW-0.09
min
PD
=1.85xSW-0.13
max
PD
=1.85xSW-0.17
min
PD
=2.62xSW-0.24
max
PD
=2.58xSW-0.16
min
PD
=4.71xSW-0.38
max
PD
=4.52xSW-0.01
min
PD
=7.53xSW-0.29
max
Inch formulas (inch)
PD=0.77SW+1.97
PD=1.11xSW-0.39
PD
=1.47xSW-3.54
min
PD
=1.85xSW-5.12
max
PD
=1.85xSW-6.69
min
PD
=2.62xSW-9.45
max
PD
=2.58xSW-6.30
min
PD
=4.71xSW-14.96
max
PD
=4.52xSW-0.39
min
PD
=7.53xSW-11.42
max
R5976654 SLM R12+ 27/01/2005
Advertisement
Table of Contents
