Table of Contents
Advertisement
9.15.6 Voltages
How to select the overview?
1. Push the cursor key ↑ or ↓ to highlight Voltages.
DIAGNOSIS
I2C
DMD
SMPS
LPS1
LPS2
LPS3
VOLTAGES
FANSPEED
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-48
2. Press ENTER to select.
The voltage overview window will be displayed.
VOLTAGES
FAN1 VOLTAGE
14V
OK
FAN2 VOLTAGE
14V
OK
FAN3 VOLTAGE
17V
OK
15 VOLT
14V
OK
30 VOLT
29V
OK
12 VOLT
12V
OK
5 VOLT
5.0V OK
3.3 VOLT
3.1V OK
<EXIT> to return
Menu 9-49
9.16 Factory defaults
What is possible ?
The projector will set all settings to the factory defaults which are by default stored in the projector. All custom settings will be deleted
and the custom files will be removed.
How to return to the factory defaults ?
1. Push the cursor key ↑ or ↓ to highlight Factory defaults.
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-50
2. Press ENTER to select.
The Factory defaults confirmation and warning menu will be displayed.
FACTORY DEFAULTS
ARE YOU SURE ?
THIS WILL OVERWRITE
ALL CUSTOM SETTINGS
AND DELETE ALL
CUSTOM FILES.
RETURN
CONTINUE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-51
R5976654 SLM R12+ 27/01/2005
9. Service Mode
129
Advertisement
Table of Contents
