How To Zoom/Focus; How To Shift The Image - Barco SLM R12 Owner's Manual

8. Installation Mode
How to start up.
1. Push the cursor key ↑ or ↓ to highlight Lens.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-24
2. Press ENTER to select.
The lens menu will be displayed.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-25

How to Zoom/Focus ?

1. Push the cursor key ↑ or ↓ to select Zoom/Focus.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-26
2. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.see "Quick Set Up Adjustments", page 50
3. When finished, press EXIT to return to the lens adjustment menu or press ENTER to go to the shift function.
Press the selection key * to switch to another pattern. Different patterns are available.

How to shift the image?

1. When on the Zoom/Focus menu, press ENTER to switch to the shift menu or
2. When on the Lens Adjustment menu, Push the cursor key ↑ or ↓ to highlight Shift and press ENTER to display the shift menu.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-27
104 R5976654 SLM R12+ 27/01/2005