8.4 Source Switching
Switching from one source to another.
To minimize undesired effects when switching from one source to another one can use the Seamless switching mode, beside Seam-
less switching there is a choice between several effects which render the transitions more enjoyable.
How to select a switching mode
1. Push the cursor key ↑ or ↓ to highlight Source Switching.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-10
2. Press ENTER to select.
The seamless source switching menu will be displayed.
SEAMLESS
SOURCE SWITCHING
EFFECT [NO TRANSITION]
<ENTER> to toggle
<EXIT> to return.
Menu 8-11
3. Press ENTER to toggle between [NO TRANSITION], [FADE], ...
OFF
RANDOM TRANSITION
Image 8-1
Example of seamless switching with Fade effect.
When an effect is selected within seamless source switching, wait until the effect is terminated before switch-
ing to another source (± 2 seconds).
8.5 No Signal
Overview
•
Changing the Background Color
•
Changing the Shutdown Setting
•
Changing the Shutdown Time
R5976654 SLM R12+ 27/01/2005
no effect installed.
source switching will happens with an effect, random chosen between the available effects.
8. Installation Mode
99