Table of Contents
Advertisement
7. Random Access Adjustment Mode
Changing the gamma value
1. Push the cursor key ↑ or ↓ to highlight Gamma.
PICTURE TUNING
COLOR TEMPERATURE
GAMMA
COLOR SPACE
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-29
2. Press ENTER to select.
3. Change the gamma value by pushing the cursor key ← or → until the desired value is reached.
Note: Default value of gamma : 2.2
4. Press EXIT to return to the Picture Tuning menu.
7.3.4
Color Space
Color space
A color space is a mathematical representation for a color. For example, the RGB color space is based on a Cartesian
coordinate system.
What can be adjusted ?
The color space (gamut), the collection of colors which can be reproduced by the projector, can be adjusted to 3 predefined stored
values (one projector specific and 2 international standards). A custom adjustment is possible. The maximum color space which
can be displayed is the projector color space. This color space is measured at the factory and stored inside the projector.
How to select.
1. Push the cursor key ↑ or ↓ to highlight Color Space.
PICTURE TUNING
COLOR TEMPERATURE
GAMMA
COLOR SPACE
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-30
The Color Space selection menu will be displayed.
COLOR SPACE
PROJECTOR
EBU
SMPTE
CUSTOM
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-31
2. Push the cursor key ↑ or ↓ to highlight the desired color space and press ENTER.
74
R5976654 SLM R12+ 27/01/2005
Advertisement
Table of Contents
