Table of Contents
Advertisement
How to connect ?
1. Connect the output of your SDI source to the input BNC of the SDI input.
Two way
hardwired
Hardwired
remote
remote
CTRL 2
CTRL 3
On
R
G
On
High Bandwidth 5 CABLE INPUT
R
G
On
High Bandwidth 5 CABLE INPUT
Digital
Video
DIGITAL VIDEO SOURCE
Image 4-5
Note: The input is always 75 Ω terminated.
2. If loop through is needed, use the OUT to connect to the next device.
How to select the digital input?
1. Key in the corresponding slot number on the RCU or the local keypad.
When a RCVDS05 is connected to the projector, the SDI input is available by keying in 83 or 84 on the RCU.
4.5.6
HD SDI Digital input (slot 3 & 4)
What can be connected to this input?
This input is full compatibility with HD digital sources. This avoids the need for analog video processing anywhere in the video
production chain and guarantees the ultimate image quality.
An active loop-through of the HD SDI input signal is provided for monitoring or for double and or triple stacking applications.
How to connect ?
1. Connect the output of your HD SDI source to the input BNC of the HD SDI input.
R5976654 SLM R12+ 27/01/2005
Diagnostic Code
Green Operation
Red Stand-by
Sync OK
IR
Hardwired
remote
RS232/422 IN
RS232/422 OUT
CTRL 1
OUT
IN
On
SDI DIGITAL INPUT
B
H/C
V
On
DVI INPUT
B
H/C
V
On
DVI INPUT
IR-Receiver
COMM PORT
TRIGGER OUT
IN
OUT
HD SDI DIGITAL MODULE
DVI OUTPUT
4. Connections
39
Advertisement
Table of Contents
