Reinstalling The Side Panel - Barco SLM R12 Owner's Manual

Image 3-11
Lamp unit fixation
3.5.3

Reinstalling the Side Panel

What has to be done
After the new lamp unit has been installed, the side panel has to be remounted.
Necessary tools
A flatblade screwdriver of 5 mm
Reinstalling the side panel
1. Move the cover guides under the back cover and push the front of the cover against the projector frame lining up the cover lock
screw with the speed nut (A) on the frame.
Image 3-12
Mounting the side cover
2. Turn with a screwdriver the side panel lock screw (B) a quarter turn clockwise to lock.
R5976654 SLM R12+ 27/01/2005
A
A
Image 3-13
Closing the side cover
A
3. Installation Guidelines
19