Dust Filter On The Back Side - Barco SLM R12 Owner's Manual

How to clean
1. Clean the dust filter with a dry cloth or blow out with compressed air.
Reinsert the dust filters and put the cover back on its place by following the opposite procedure. Take care to
click the lens light cover into its position.
Image B-5
B.1.2 Dust filter on the back side
Necessary tools
• Flat screwdriver
• Philips screwdriver
What should be done
To get access to the dust filters, the back cover must be removed.
How to remove
1. Loosen the 3 screw on the back side.
R5976654 SLM R12+ 27/01/2005
B. Built-In Dust Filters
139