Barco SLM R12 Owner's Manual page 26

3. Installation Guidelines
Image 3-16
Lamp Z-Axis alignment (Former lamp house)
Image 3-17
Lamp Z-Axis alignment (Universal lamp house)
6. Slowly turn the screw B (image 3-16, , image 3-17, using an Allen key of 3 mm, a little clockwise until the maximum value of the
Z-AXIS indication in the lamp menu is reached.
7. Tighten the lock nut on the adjustable screw to secure its position (nutdriver 10).
C
AUTION
22
:
Never turn the other screws ! These are factory aligned.
A
A B
R5976654 SLM R12+ 27/01/2005