Table of Contents
Advertisement
3. Installation Guidelines
Image 3-20
Battery cover removal
2. Plug in the battery (9 V battery - type E-block or equivalent) onto the battery contact plate (A).
B
Image 3-21
Battery connection
3. Place the battery into the lower compartment (B) (image 3-21).
4. Insert the pins of the battery cover (A) into the slots on the bottom of battery back cover and close the cover by pushing downwards
(B) until it clicks.
Image 3-22
Battery cover mount
5. A card, containing a button preset overview, can be inserted behind the plastic windowpane on the battery cover.
26
2
A
B
A
1
A
B
R5976654 SLM R12+ 27/01/2005
Advertisement
Table of Contents
