Amanda @SOHO Version 3.xx Switching Manual page 95

Chapter 10: Programming the Samsung DCS 2.2/Compact
d. Press UP to go to the next option.
e. Go on to the next numbered step.
2. The display shows:
TRK FOR DN1
YES
Follow the directions given in step 1, depending on whether the setting is as shown or
not as shown.
3. The display shows:
EXT FOR DN2
NO
Follow the directions given in step 1, depending on whether the setting is as shown or
not as shown.
4. The display shows:
TRK FOR DN2
NO
Follow the directions given in step 1, depending on whether the setting is as shown or
not as shown.
5. The display shows:
SEPARATOR
NO
Follow the directions given in step 1, depending on whether the setting is as shown or
not as shown.
6. The display shows:
DISCONECT SIGNAL
C
If the setting is as shown above:
a. Press UP to go to the next option.
b. Go on to step 7.
If the setting is not as shown above:
a. Press the RIGHT softkey to move the cursor to the bottom line of the display.
b. Press C.
c. Press UP to go to the next option.
d. Go on to step 7.
7. The display shows:
CALL TYPE ID
DIRECT CALL:*
87