Amanda @SOHO Version 3.xx Switching Manual page 41
Telephone switching systems
Hide thumbs
Also See for Amanda@SOHO Version 3.xx:
- User manual (34 pages) ,
- Administrator's manual (60 pages)
Table of Contents
Advertisement
Chapter 4: Programming the Comdial Unisyn
6.
Select the station ports to be programmed by dialing the station port number or press-
ing the A1 to A16 buttons.
7.
Dial * when all the station ports have been selected.
8.
Dial ** to finish but stay in configuration mode.
Buttons to
Line
Press
01
B1
02
B2
03
B3
04
B4
05
B5
06
B6
To program delayed ringing:
1.
If you are not already in configuration mode, dial ITCM *#746*.
2.
Dial 54 "STA/LINE CONFIG".
3.
Dial 2 "DELAY RING".
4.
Select the line ports (1 through 6) for direct ringing by dialing 01 through 06 or press-
ing B1 through B6 (see table above).
5.
Dial # when all the line ports have been selected.
6.
Select the station ports to be programmed by dialing the station port number or press-
ing the A1 to A16 buttons.
7.
Dial * when all the station ports have been selected.
8.
Dial ** to finish but stay in configuration mode.
To program night ringing:
1.
If you are not already in configuration mode, dial ITCM *#746*.
2.
Dial 54 "STA/LINE CONFIG".
3.
Dial 3 "NIGHT RING".
4.
Select the line ports (1 through 6) for direct ringing by dialing 01 through 06 or press-
ing B1 through B6 (see table above).
5.
Dial # when all the line ports have been selected.
33
Advertisement
Table of Contents
