Amanda @SOHO Version 3.xx Switching Manual page 71

Chapter 7: Programming the NEC Electra II
NEC Electra II (release 3.00+)
####################################################
# NEC Electra Level II
####################################################
dl_dtwait F--
dl_ndtret -
dl_rnaret F-
dl_bsyret F-
dl_hupret F-
dl_connect H
tmo_dtwait 4
flashtm 60
dt_answer
dt_hangup
dl_prefix
dl_suffix H
dl_init
dl_stop
dl_pickup
dl_conference# What to dial to create/record a conference call
integration 10 'rr'
integration 10 'rrr'
integration 10 'rrrr'
• The tokens that turn the message waiting light off are in
c:\amanda\pbx.db\171.off.
This file contains the tokens "7#%U".
• The dial codes and integration strings used by the switch are in
c:\amanda\pbx.db\171.pbx.
This file contains the following lines:
# Dial code to put a caller on transfer hold
# Dial code to use when there is no transfer dialtone:
# Dial code to return to caller after Ring No Answer :
# Dial code to return to caller when there is a Busy :
# Dial code to use after a call screening reject
# Dial code to connect the caller to the extension
# Number of seconds to wait for dialtone detection
# Number of 1/100 seconds to use for Flash time
# Which DTMF tone to listen to for answer detection
# Which DTMF tone to listen to for hangup detection
# What to dial BEFORE dialing the User ID extension
# What to dial AFTER dialing the User ID extension
# What to dial when the system first starts up
# What to dial when the system performs a shutdown
# What to dial when a port goes off-hook
#
:
63
:
:
:
:
:
:
:
:
:
:
:
: