Amanda @SOHO Version 3.xx Switching Manual page 93

Chapter 10: Programming the Samsung DCS 2.2/Compact
When programming MMC: 207, you use the following program keys:
Purpose
Scroll through a set of options
Enter selection
Move cursor right and left
Move cursor from top to bottom line on
display (or vice versa)
Store data and advance to next MMC
Clear entry
Select ALL
Store and exit
To create a VM/AA port:
1. Press TRSF then dial 207.
The display shows a station number, followed by VMAA PORT and the default value
NORMAL PORT:
[209] VMAA PORT
NORMAL PORT
2. Do one of the following:
• Dial station number (for example, 209).
OR
• Press UP or DOWN to select a station number. Then press the RIGHT soft key to
move the cursor to NORMAL PORT:
If you picked station 209 (as in the example), the display would show:
[209] VMAA PORT
NORMAL PORT
3. Do one of the following:
• Dial 1 for VMAA PORT.
OR
• Press UP or DOWN to select VMAA PORT. Then press the RIGHT soft key:
If you picked station 209 (as in the example), the display would show:
[209] VMAA PORT
VMAA PORT
Key
UP and DOWN Arrows
Keypad
RIGHT and LEFT Softkeys
RIGHT and LEFT Softkeys
SPK
HOLD
ANS/RLS
TRSF
85