Amanda @SOHO Version 3.xx Switching Manual page 32

24
System Speed Dial Numbers without entering the System Password. Night Service with a
System Password is useful for controlling unauthorized use of telephones after hours.
The status of the Night Service button at extension 10 tells Amanda to operate in day or
night mode.
The Night Service button returns to the status (on or off) that it was in immediately prior
to a power failure or the use of System Reset (#728).
A Night Service must be programmed on the system telephone at extension 10.
Night Service must be programmed on a button with lights. This feature does not work if it
is programmed on a button without lights.
A user in the Night Service Group can receive an after-hours outside call only if it comes
in on a line that is assigned to that user's telephone. Line assignments for extensions in the
Night Service group can vary from one extension to another.
Dialing restrictions for extensions not in the Night Service Group remain the same as
during normal daytime operation.
If you reassign the Night Service button, it is removed from the button where it was
previously assigned.
To program a Night Service Button at extension 10:
1. Press
2. Do one of the following:
• To assign Night Service to the first available button, press
display similar to the following appears:
Night Service Button
1 Assigned - Ext10
• To remove the Night Service button assignment, press
play similar to the following appears:
Night Service Button
2 Not Assigned - Ext10
• To assign Night Service to a specific button, press
following appears:
Night Service Button
3 Select a Button
Then press a programmable button with lights to assign Night Service to that button.
3. Select another procedure or exit programming mode.
4. Label the Night Service button at extension 10.
For more information about #504, #403, and #406, check a Partner manual.
Telephone Switching Systems for Amanda@SOHO
until a
until a dis-
. A display similar to the