Forwarding Calls To Voice Mail; Notification And Integration Files - Amanda @SOHO Version 3.xx Switching Manual

70

Forwarding Calls to Voice Mail

Notification and Integration Files

Panasonic KXTD 1232
####################################################
# Panasonic KXT-D 1232
####################################################
dl_dtwait F--
dl_ndtret -
dl_rnaret F-
dl_bsyret F-
dl_hupret F-
dl_connect H
tmo_dtwait 0
flashtm 55
dt_answer
dt_hangup '#9#'
dl_prefix
dl_suffix H
dl_init
Because Amanda does blind transfers, you need to program each telephone to forward
calls to voice mail when that telephone is busy or not answered.
To program calls to forward to voice mail on a digital telephone:
1. Go off-hook.
2. Dial 7105 and the first pilot number assigned to voice mail hunt group.
The fwd/dnd button light will stay on.
To cancel call forwarding:
• Go off-hook and dial 7100.
There is no way to turn it off using the button.
Do Not Disturb can be controlled through Amanda or by programming a button with
7101. It can be canceled using 7100.
For each telephone switching system, Amanda@SOHO stores files with notification, dial
code, and integration information. When you select a telephone switching system,
Amanda knows which files to use for your switch. The files contain:
• The tokens that turn the message waiting light on are in c:\amanda\pbx.db\191.on.
This file contains the tokens "-701,%U".
• The tokens that turn the message waiting light off are in
c:\amanda\pbx.db\191.off.
This file contains the tokens "-700,%U".
• The dial codes and integration strings used by the switch are in
c:\amanda\pbx.db\191.pbx.
This file contains the following lines:
# Dial code to put a caller on transfer hold
# Dial code to use when there is no transfer dialtone:
# Dial code to return to caller after Ring No Answer :
# Dial code to return to caller when there is a Busy :
# Dial code to use after a call screening reject
# Dial code to connect the caller to the extension
# Number of seconds to wait for dialtone detection
# Number of 1/100 seconds to use for Flash time
# Which DTMF tone to listen to for answer detection
# Which DTMF tone to listen to for hangup detection
# What to dial BEFORE dialing the User ID extension
# What to dial AFTER dialing the User ID extension
# What to dial when the system first starts up
Telephone Switching Systems for Amanda@SOHO
#
:
:
:
:
:
:
:
:
:
: