Amanda @SOHO Version 3.xx Switching Manual page 48

40
####################################################
# Comdial DSU/Unison, 2-digit dial plan
####################################################
dl_dtwait F,
dl_ndtret F-
dl_rnaret F-
dl_bsyret F-
dl_hupret F-
dl_connect H
tmo_dtwait 0
flashtm 55
dt_answer
dt_hangup A
dl_prefix ,
dl_suffix H
dl_init
dl_stop
dl_pickup
dl_conference
integration 10 'rr2'
integration 10 'rr3'
integration 10 'ee0'
integration 10 '9*ee'
integration 10 'rr'
####################################################
# Comdial DSU/Unison, 3-digit dial plan
####################################################
dl_dtwait F,
dl_ndtret F-
dl_rnaret F-
dl_bsyret F-
dl_hupret F-
dl_connect H
tmo_dtwait 0
flashtm 55
dt_answer
dt_hangup A
dl_prefix ,
dl_suffix H
dl_init
dl_stop
dl_pickup
dl_conference
integration 10 'rrr2'
• The dial codes and integration strings used by the switch are
c:\amanda\pbx.db\121.pbx for two-digit extensions and
c:\amanda\pbx.db\122.pbx for three-digit extensions.
121.pbx contains the following lines:
# Dial code to put a caller on transfer hold
# Dial code to use when there is no transfer dialtone:
# Dial code to return to caller after Ring No Answer :
# Dial code to return to caller when there is a Busy :
# Dial code to use after a call screening reject
# Dial code to connect the caller to the extension
# Number of seconds to wait for dialtone detection
# Number of 1/100 seconds to use for Flash time
# Which DTMF tone to listen to for answer detection
# Which DTMF tone to listen to for hangup detection
# What to dial BEFORE dialing the User ID extension
# What to dial AFTER dialing the User ID extension
# What to dial when the system first starts up
# What to dial when the system performs a shutdown
# What to dial when a port goes off-hook
# What to dial to create/record a conference call
122.pbx contains the following lines:
# Dial code to put a caller on transfer hold
# Dial code to use when there is no transfer dialtone:
# Dial code to return to caller after Ring No Answer :
# Dial code to return to caller when there is a Busy :
# Dial code to use after a call screening reject
# Dial code to connect the caller to the extension
# Number of seconds to wait for dialtone detection
# Number of 1/100 seconds to use for Flash time
# Which DTMF tone to listen to for answer detection
# Which DTMF tone to listen to for hangup detection
# What to dial BEFORE dialing the User ID extension
# What to dial AFTER dialing the User ID extension
# What to dial when the system first starts up
# What to dial when the system performs a shutdown
# What to dial when a port goes off-hook
# What to dial to create/record a conference call
Telephone Switching Systems for Amanda@SOHO
#
#
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
: