Notification And Integration Files - Amanda @SOHO Version 3.xx Switching Manual

Telephone switching systems
Hide thumbs Also See for Amanda@SOHO Version 3.xx:
Table of Contents

Advertisement

122

Notification and Integration Files

Toshiba DK-8
####################################################
# Toshiba DK-8
####################################################
dl_dtwait F-
dl_ndtret F-
dl_rnaret F-
dl_bsyret F-
dl_hupret F-
dl_connect H
tmo_dtwait 4
flashtm 55
dt_answer
dt_hangup D
4.
Press Hold.
5.
Press Spkr.
6.
Do one of the following:
On a DK-8, dial 008*009.
This represents ports 8 and 9, and, therefore, extensions 18 and 19.
On a DK-16 or DK-16e, dial 008*011.
This represents ports 8 through 11, and, therefore, extensions 18 through 21.
7.
Make sure that the following LEDs are ON:
5, 9, 15, 16, 17, 18, 19, 20
All others must be OFF.
8.
Press Hold.
For each telephone switching system, Amanda@SOHO stores files with notification, dial
code, and integration information. When you select a telephone switching system,
Amanda knows which files to use for your switch. The files contain:
The tokens that turn the message waiting light on are in c:\amanda\pbx.db\250.on,
c:\amanda\pbx.db\251.on, and c:\amanda\pbx.db\252.on.
This file contains the tokens "63%E" for the Toshiba DK-8 and Toshiba DK-16.
It contains the tokens "#63%E" for the Toshiba DK-16e.
The tokens that turn the message waiting light off are in
c:\amanda\pbx.db\250.off, c:\amanda\pbx.db\251.off, and
c:\amanda\pbx.db\252.off.
This file contains the tokens "64%E" for the Toshiba DK-8 and Toshiba DK-16.
It contains the tokens "#64%E" for the Toshiba DK-16e.
The dial codes and integration strings used by the switch are in
c:\amanda\pbx.db\250.pbx, c:\amanda\pbx.db\251.pbx, and
c:\amanda\pbx.db\252.pbx.
This file contains the following lines for the Toshiba DK-8:
# Dial code to put a caller on transfer hold
# Dial code to use when there is no transfer dialtone:
# Dial code to return to caller after Ring No Answer :
# Dial code to return to caller when there is a Busy :
# Dial code to use after a call screening reject
# Dial code to connect the caller to the extension
# Number of seconds to wait for dialtone detection
# Number of 1/100 seconds to use for Flash time
# Which DTMF tone to listen to for answer detection
# Which DTMF tone to listen to for hangup detection
Telephone Switching Systems for Amanda@SOHO
#
:
:
:
:
:
:
:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Soho 3

Table of Contents