Amanda @SOHO Version 3.xx Switching Manual page 153

Chapter 14: Programming the WIN 36D
30. Dial 2.
The display reads:
2:OFF
31. Press the HOLD key.
Information about the next station appears.
32. Repeat steps 30 and 31 for each extension in the hunt group.
33. Press the CO8 key to save your data and exit program 406.
The display reads:
QUIT
34. Press the HOLD key.
The display reads:
PROGRAM NO. ?_
35. Dial 408.
The display reads:
408:T-TO-T CNNT
36. Press the HOLD key.
The display reads:
S10:MODE=1?
37. Press the HOLD key repeatedly—until you reach the first extension in the hunt group.
The display reads:
S18:MODE=1?
38. Do one of the following:
• If you do want trunk-to-trunk transfers, press 1.
The display reads:
1:YES
• If you do not want trunk-to-trunk transfers, press 2.
The display reads:
2:NO
39. Press the HOLD key.
Information about the next station appears.
40. Repeat steps 38 and 39 for each extension in the hunt group.
41. Press the CO8 key to save your data and exit program 408.
The display reads:
QUIT
145