Copy Settings - Kyocera ECOSYS FS-3140MFP Operation Manual

Copy Settings

The following settings are available for copying functions.
• Photo Processing ...8-68
• Paper Selection ...8-69
• Auto Paper Selection ...8-70
• Auto % Priority ...8-71
• Select Key Set ...8-72
NOTE:
If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
Photo Processing
Set the resolution for copying a photo.
Dithering(Normal)
Dithering(Rough)
Use the procedure below to set Photo Processing.
Sys. Menu/Count.:a b
4
User/Job Account
5 Common Settings
6
********************* Copy
Copy:
1
********************* Photo Processing
2 Paper Selection
3
AutoPaperSelect.
Photo Processing:a b
1 *Dithering(Normal)
*********************
2
Dithering(Rough)
Item
Sets the resolution to standard.
Sets the resolution to low.
[ Exit ]
a b
[ Exit ]
Description
1
In the Sys. Menu/Count. menu, press the
select [Copy].
2
Press the OK key. The Copy menu appears.
3
Press the or
4
Press the OK key. Photo Processing appears.
5
Press the or
[Dithering(Rough)].
8-68
Default Setting (System Menu)
key to select [Photo Processing].
key to select [Dithering(Normal)] or
or key to