Kyocera ECOSYS FS-3140MFP Operation Manual page 339

Network Setting: a b
5
WSD-PRINT
6
IPSec
7 Secure Protocol
*********************
Secure Protocol: a b
1
********************* SSL
2
IPP Security
3
HTTP Security
SSL:
1 *Off
*********************
2 On
IPP Security
Specify the protocol to be used for IPP. The default setting is IPPoverSSL only.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
********************* System
Login User Name:
*******************
Login Password:
4
Press the OK key. The Network Setting menu appears.
[ Exit ]
5
Press the
6
Press the OK key. Secure Protocol appears.
[ Exit ]
7
Press the
8
Press the OK key. SSL appears.
a b
9
Press the
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
1
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
8-141
Default Setting (System Menu)
or key to select [Secure Protocol].
or key to select [SSL].
or key to select [On] or [Off].
8
or key to