Kyocera ECOSYS FS-3140MFP Operation Manual page 297

Manual:
3
-1
4 *
********************* 0 Normal
5
+1
Send/Box Density
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels both in
auto and manual density modes.
Sys. Menu/Count.:a b
: Document Box
;
Edit Destination
<
********************* Adjust/Maint.
Adjust/Maint.:
1
Copy Denst. Adj.
*********************
2
Send/Box Density
3
Correct. Bk Line
Send/Box Density:a b
1
Auto
*********************
2
Manual
Manual:
3 -1
4 *
********************* 0 Normal
5
+1
6
Press the OK key. This displays the density selection
a b
screen for the mode selected in step 5. The screen
shown is the one when [Manual] is selected.
7
Press the
Lighter] to [+3 Darker].
8
Press the OK key. Completed. is displayed and the
screen returns to the Copy Denst. Adj. menu.
1
In the Sys. Menu/Count. menu, press the
select [Adjust/Maint.].
[ Exit ]
2
Press the OK key. The Adjust/Maint. menu appears.
a b
[ Exit ]
3
Press the
4
Press the OK key. Send/Box Density appears.
[ Exit ]
5
Press the
6
Press the OK key. This displays the density selection
a b
screen for the mode selected in step 5. The screen
shown is the one when [Manual] is selected.
7
Press the
Lighter] to [+3 Darker].
8-99
Default Setting (System Menu)
or key to select the density from [-3
or key to select [Send/Box Density].
or key to select [Auto] or [Manual].
or key to select the density from [-3
or key to
8