Kyocera ECOSYS FS-3140MFP Operation Manual page 299

Adjust/Maint.:
1 Copy Denst. Adj.
*********************
2
Send/Box Density
3
Correct. Bk Line
Correct. Bk Line: a b
1 *Off
*********************
2
On(Low)
3
On(High)
New Developer
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
Sys. Menu/Count.:a b
: Document Box
;
Edit Destination
<
********************* Adjust/Maint.
Adjust/Maint.:
1
********************* Copy Denst. Adj.
2
Send/Box Density
3
Correct. Bk Line
Service Setting: a b
1
********************* Service Status
2
Network Status
3
New Developer
2
Press the OK key. The Adjust/Maint. menu appears.
a b
[ Exit ]
3
Press the
4
Press the OK key. Correct. Bk Line appears.
5
Press the
[On(High)].
6
Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
1
In the Sys. Menu/Count. menu, press the
select [Adjust/Maint.].
[ Exit ]
2
Press the OK key. The Adjust/Maint. menu appears.
a b
[ Exit ]
3
Press the
4
Press the OK key. The Service Setting menu appears.
[ Exit ]
5
Press the
8-101
Default Setting (System Menu)
or key to select [Correct. Bk Line].
or key to select [Off], [On(Low)] or
or key to select [Service Setting].
or key to select [New Developer].
8
or key to