Copy Default Settings - Kyocera KM-1650 Advanced Operation Manual

Kyocera network printer advanced operation guide km-1650, km-2050, km-2550
Hide thumbs Also See for KM-1650:
Table of Contents

Advertisement

System Settings

Copy Default Settings

3-2
Initial Mode is the state the machine enters after warm-up or if Reset is
pressed. If no operations are performed for a preset period of time, the
machine returns to initial mode. Any settings that have been selected will
be cleared.
In the factory default setting, paper of the same size as the original is
selected automatically (Auto Paper Selection mode), the copy
magnification ratio is set to 100 %, the number of copies to be made is set
to 1 and the Image Quality is set to Text + Photo mode.
Use these instructions to customize the settings to meet your
requirements.
The following settings are available:
Exposure Mode
Original Image Quality
EcoPrint Mode
Background Color Adjustment
Paper Selection
Paper Type in Auto Paper Selection
Priority Cassette
Default Magnification
Auto Exposure Adjustment
Auto OCR Exposure Adjustment
Exposure Adjustment for Text + Photo Originals
Exposure Adjustment for Text Originals
Exposure Adjustment for Photo Originals
Sort Copying
Offset Copying
Auto Rotation Copy
Margin Width Default Value
Border Erase Width Default Value
Number of Copies Limit
Black Streaking Reduction Processing
ADVANCED OPERATION GUIDE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-2050Km-2550Dc 2116Dc 2120Dc 2125

Table of Contents