Kyocera ECOSYS FS-3140MFP Operation Manual page 97

ID Card Copy
The procedure for using ID Card copying is explained below.
Recalled.
z Program 1
1
Press the Copy key when the Copy key/indicator is off.
NOTE:
If the Message Display is turned off, press the
Power key and wait for the machine to warm up.
2
Place the original on the platen.
Put the scanning side facedown in the center of
Statement or A5 size scanning area.
NOTE:
For loading instructions, refer to Loading
Originals on page 2-53.
3
Press the Program 1.
The ID Card Copy function is recalled.
4
Press the Start key. Scanning begins.
5
Turn over the original on the platen and press the Start
key.
6
After scanning all originals, press [End Scan] (the Right
Select key) to start copying.
3-5
Basic Operation
3