Rear Unit - Kyocera ECOSYS FS-3140MFP Operation Manual

Rear Unit

Follow the steps below to clear paper jams of the rear unit.
Document Processor
Follow the steps below to clear paper jams in the document processor.
1
If paper is not completely ejected into the output tray,
open the rear cover.
2
Open the fuser cover and remove the jammed paper by
pulling it out.
NOTE:
If you cannot find a paper jam, try checking inside
the rear of the machine.
CAUTION:
The fuser unit inside the machine is hot.
Do not touch it with your hands as it may result in
burn injury. Remove jammed paper carefully.
3
Close the rear cover. The machine warms up and
resumes printing out.
1
Remove all of the originals from the document feed tray.
10-17
Troubleshooting
10