Kyocera ECOSYS FS-3140MFP Operation Manual page 160

Select Computer: a b
P Computer01
*********************
P Computer02
P Computer03
[ Cancel ] [ Detail ]
Press Start Key.
P :Computer01
5
Press the or
6
Select the destination computer from the computer list.
Press [Detail] (the Right Select key) to see the
information of the selected computer.
7
Press the OK key to confirm the destination, and then
press the Start key. Transmission starts.
NOTE:
To change the destination computer, press the Back
key and then press [Yes] (the Left Select key). This brings
you back to step 6.
NOTE:
To use WSD Scan from your computer, press [From
Computer] in step 5 and then scan the original from the
computer.
5-20
Sending Functions
key to select [From Oper. Panel].