Replacing The Maintenance Kit (Mk-370) - Kyocera ECOSYS FS-3140MFP Operation Manual

Prolonged Non-Use and Moving of the Machine
Prolonged Non-use
If you ever leave the machine unused for a long period of time, remove the power cord from the wall outlet.
We recommend you consult with your dealer about the additional actions you should take to avoid possible damage
that may occur when the machine is used next time.
Moving the Machine
When you move the machine:
• Move it gently.
• Keep it as level as possible to avoid spilling toner inside the machine.
• Be sure to consult a service technician before attempting long distance transportation of the machine.
WARNING:
If you ship the machine, remove and pack the developer unit in a plastic bag and ship them separately
from the machine.

Replacing the maintenance kit (MK-370)

When the print position shifts out of place or originals are not feeded, components must be replaced. Contact your
Service Representative and purchase the maintenance kit. Follow the procedure below to replace the maintenance
kit.
5
Insert the new waste toner box as shown at the left.
When the box is set correctly, it will snap into place.
6
Make sure that the waste toner box is correctly inserted
and close the left cover.
7
After replacing the toner containers and the waste toner
box, clean the internal parts. For instructions, refer to
Cleaning on page 9-2.
NOTE:
Return the exhausted waste toner box to your
dealer or service representative. The collected waste toner
box will be recycled or disposed in accordance with the
relevant regulations.
9-8
Maintenance