Confirm Destination Screen - Kyocera ECOSYS FS-3140MFP Operation Manual

Confirm Destination Screen

If the screen for confirming the destination before transmission (page 8-88) is set to [On], Check through the all
destination and press [Next]. appears when the Start key is pressed.
Use the procedure below to operate the Confirm Destination screen.
Destination List: a b
p Morgan@###########N
*********************
0667640000
0667741234
[ Cancel ] [
p Morgan@########Na b
1
Detail
2
Delete
Set original
and press Start key.
[ Cancel ]
Check the destination
list through the end.
1
Press the
Press the OK key to edit or delete the selected
destination.
To add a destination, press [Cancel] (the Left Select key)
Next ]
to return to the previous screen.
2
After the checking is finished, press [Next] (the Right
Select key). Set original and press Start key. is displayed
on the screen.
If there are destinations that are hidden and not yet
checked, the screen displays Check the destination list
through the end. and returns to the Destination List
screen. Check all destinations.
3
Place the original on the platen and press the Start key.
Transmission starts.
3-25
or key to check all destinations.
Basic Operation
3