Kyocera ECOSYS FS-3140MFP Operation Manual page 105

The procedure for using two-sided/duplex copying is explained below.
Function Menu:
1 Paper Selection T
*********************
2
Collate
3
Duplex
Duplex:
1 *1-sided>>1-sided
*********************
2 1-sided>>2-sided
3
2-sided>>1-sied
Finish. Binding: a b
1 *o Left/Right
*********************
2 p Top
Orig.Orientation: a b
1 c Top Edge Top
********************* 2 *d Top Edge left
Orig. Binding:
1 *o Left/Right
*********************
2 p Top
Orig.Orientation: a b
1 c Top Edge Top
2 *d Top Edge left
*********************
1
Press the Function Menu key. Function Menu appears.
a b
T
T
[ Exit ]
2
Press the
3
Press the OK key. Duplex appears.
a b
4
Press the
copying mode.
If you select [1-sided>>2-sided], press [Detail] (the Right
Select key) and you can select the binding edge of the
finished copies and the original setting orientation.
After pressing the OK key, select the binding edge of the
finished copies and the original setting orientation.
If you select [2-sided>>1-sided], press [Detail] (the Right
a b
Select key) and you can select the binding edge of the
original and the original setting orientation.
After pressing the OK key, select the binding edge of the
original and finished copies, and the original setting
orientation.
3-13
or key to select [Duplex].
or key to select the desired duplex
Basic Operation
3