Kyocera ECOSYS FS-3140MFP Operation Manual page 370

Error Message
Machine failure.
Call service.
Memory is full.
Print job cannot be
processed
completely.
Memory is full. Job is
canceled.
USB memory error.
Job is canceled.
Removable memory is
full. Job is canceled.
Cannot feed paper set
cassette 1.
Place original
and press Start key.
Paper jammed.
Job not stored. Press
[OK].
Remove original from
document processor.
Check points
–
Is Error code "C4200"
displayed?
–
–
–
–
Is any of the paper feeders
or the printer cassette upper
than the selected one
properly closed when one or
more optional feeders are
installed?
–
–
–
Are there any originals left in
the document processor?
Corrective Actions
Internal error has occurred. Make a
note of the error code displayed on
the Message Display. Turn off the
machine, unplug the power cord, and
contact your Service Representative.
Internal condensation has occurred
as a result of a sudden change in
temperature. Turn off the machine
and let stand for 30 to 90 minutes,
and then back on again. If this
message still remains, turn off the
machine, unplug the power cord, and
contact your Service Representative.
Unable to continue the job as the
memory is used up.
Press the OK key to print the
scanned pages. The print job cannot
be processed completely.
Press the Stop key to cancel the job.
The job is canceled. Press the OK
key.
This job is canceled. Press the OK
key.
This job is canceled. Press the OK
key.
Close the paper feeder properly.
Remove originals from the document
processor, put them back in their
original order, and place them again.
Press the Start key to resume
printing.
Press the Stop key to cancel the job.
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the Message
Display. Leave the machine on and
follow the instruction to remove the
jammed paper.
Press the OK key to store the job.
Remove originals from the document
processor.
10-8
Troubleshooting
Reference
Page
—
—
—
—
—
—
2-41
2-54
10-13
—
—