Kyocera ECOSYS FS-3140MFP Operation Manual page 345

POP3 Security 1 (2, 3)
Select the communication protocol according to the type of security employed by the POP3 server. The default setting
is Off.
NOTE:
POP3 (E-mail RX) must be set to On in Protocol Detail on page 8-136.
The table below shows the available settings.
Item
Off
SSL/TLS
STARTTLS
You can change the port number using COMMAND CENTER.
*
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1 Report
2
Counter
3
********************* System
Login User Name:
*******************
Login Password:
System:
1
********************* Network Setting
2
I/F Block Set.
3
Security Level
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
Do not use security employed by the POP3 server.
Encryption is applied any data communication. Encryption is
applied any data communication. To enable POP3 security, the
POP3 port may have to be changed according to the server
settings. Typically, 995* for SSL/TLS is well-known POP3 port.
Encryption is applied any data communication. Typically, 110* for
STARTTLS is well-known POP3 port.
1
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
2
The System menu appears.
a b
[ Exit ]
3
Press the
8-147
Default Setting (System Menu)
Description
or key to select [Network Setting].
8
or key to