Kyocera ECOSYS FS-3140MFP Operation Manual page 126

Selecting the Multi Purpose Tray
Change the paper size and media type.
The available paper sizes and media types are shown in the table below.
NOTE:
You can conveniently select in advance the size and type of paper that will be used often and set them as
default (refer to Paper Size and Media Type Setup for Multi Purpose Tray on page 8-14).
Use the procedure below to select the paper size and media type.
Function Menu:
1 Paper Selection T
*********************
2 Collate
3
Duplex
Category Item
Paper Standard
Size Sizes
Size
Entry**.
Media Plain, Transparency, Rough, Vellum, Labels, Recycled,
Type Preprinted***, Bond, Cardstock, Color, Prepunched***,
Letterhead***, Envelope, Thick, High Quality, Custom 1 to
8***
* For instructions on how to specify the custom paper size (Custom),
refer to Adding a Custom Size and Media Type for Paper to Print on
page 8-10.
** The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 8-24.
*** For instructions on how to specify the custom paper types 1 to 8,
refer to Paper Weight on page 8-16.
To print on preprinted or prepunched paper or on letterhead, refer to
Special Paper Action on page 8-21.
a b
[ Exit
Sizes
Letter, Legal, Statement, Executive, Oficio II,
A4, A5, A6, B5, B6, Folio, 16K, ISO B5,
Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope
C5, Hagaki, Oufuku Hagaki, Youkei 4, Youkei
2 and Custom*
Inch models
Horizontal: 5.83 to 14.02" (in 0.01" increments),
Vertical: 2.76 to 8.50" (in 0.01" increments)
Metric models
Vertical: 70 to 216 mm (in 1 mm increments),
Horizontal: 148 to 356 mm (in 1 mm
increments)
1
Press the Copy key.
2
Place the original.
3
Press the Function Menu key. Function Menu appears.
T
T
]
4
Press the
4-4
or key to select [Paper Selection].
Copying Functions