Kyocera ECOSYS FS-3140MFP Operation Manual page 343

Network Setting: a b
5
WSD-PRINT
6
IPSec
7 Secure Protocol
*********************
Secure Protocol: a b
2
IPP Security
3
HTTP Security
4
********************* LDAP Security
LDAP Security:
1 *Off
*********************
2 SSL/TLS
3
STARTTLS
SMTP Security
Select the communication protocol according to the type of security employed by the SMTP server. The default setting
is Off.
NOTE:
SMTP (E-mail TX) must be set to On in Protocol Detail on page 8-136.
The table below shows the available settings.
Item
Off
SSL/TLS
STARTTLS
You can change the port number using COMMAND CENTER.
*
4
Press the OK key. The Network Setting menu appears.
[ Exit ]
5
Press the
6
Press the OK key. Secure Protocol appears.
[ Exit ]
7
Press the
8
Press the OK key. LDAP Security appears.
a b
9
Press the
[STARTTLS].
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
Do not use security employed by the SMTP server.
Encryption is applied any data communication. Encryption is
applied any data communication. To enable SMTP security, the
SMTP port may have to be changed according to the server
settings. Typically, 465* for SSL/TLS is well-known SMTP port.
Encryption is applied any data communication. Typically, 25* or
587* for STARTTLS is well-known SMTP port.
8-145
Default Setting (System Menu)
or key to select [Secure Protocol].
or key to select [LDAP Security].
or key to select [Off], [SSL/TLS] or
Description
8