Interface Block Setting - Kyocera ECOSYS FS-3140MFP Operation Manual

Interface Block Setting

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3
********************* System
Login User Name:
*******************
Login Password:
System:
1 Network Setting
2
********************* I/F Block Set.
3
Security Level
I/F Block Set.:
1
USB Host
*********************
2
USB Device
3
Option I/F
1
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
[ Exit ]
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
[ Login ]
2
The System menu appears.
a b
[ Exit ]
3
Press the
4
Press the OK key. The I/F Block Set. menu appears.
a b
[ Exit ]
5
Press the
8-149
Default Setting (System Menu)
or key to select [I/F Block Set.].
or key to select [USB Host].
or key to
8