Kyocera ECOSYS FS-3140MFP Operation Manual page 298

Correct. Bk Line
Correct fine black lines (black streaks caused by contamination), which may appear on the copies, when the
document processor used.
Paper feed
direction
The table below shows the available settings.
Off
On(Low)
On(High)
NOTE:
Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to keep the
default ([Off]).
Use the procedure below to specify the setting for correcting fine black lines.
Sys. Menu/Count.:a b
:
Document Box
;
Edit Destination
<
********************* Adjust/Maint.
Item
No correction performed.
Correction performed. The reproduction of
the image becomes lower when using Off.
Correction performed. Select this item if
black streak remains after using On (Low).
The reproduction of the image becomes
lower when using On (Low).
[ Exit ]
8
Press the OK key. Completed. is displayed and the
screen returns to the Send/Box Density menu.
Description
1
In the Sys. Menu/Count. menu, press the
select [Adjust/Maint.].
8-100
Default Setting (System Menu)
or key to