Kyocera ECOSYS FS-3140MFP Operation Manual page 84

Specifying Paper Size and Media
The default paper size setting for cassette, for multi purpose tray and for the optional paper feeder (cassettes 2 to 4)
is [Letter], and the default media type setting is [Plain].
To fix the type of paper to be used in cassettes, specify the paper size and media type setting. (Refer to Specifying
Paper Size and Media Type for the Cassettes on page 2-48.)
To fix the type of paper to be used in multi purpose tray, specify the paper size setting. (Refer to Specifying Paper
Size and Media Type for the Multi Purpose Tray on page 2-50.)
Specifying Paper Size and Media Type for the Cassettes
To fix the type of paper to be used in cassette or the optional paper feeder (cassettes 2 to 4), specify the paper size.
Also, you use a media type other than plain paper, specify the media type setting.
Paper Size
Media Type
NOTE:
If using the FS-3140MFP+, the available media types for printing received faxes are as shown below.
Plain, Recycled, Bond, Color, High Quality and Rough
When the paper size dial on a cassette is set to OTHER, a paper size can be set for the cassette.
Login User Name:
********************
Login Password:
Sys. Menu/Count.: a b
3
System
4
User/Job Account
5
Common Settings
*********************
Selection Item
Select from the standard sizes. Selectable paper
sizes are as follows.
Inch size: Letter, Legal, Statement* and Oficio II
Metric size: A4, A5, A6*, B5, Folio, and 16K
Plain, Rough, Recycled, Preprinted, Bond, Color,
Prepunched, Letterhead, High Quality and
Custom
* Statement and A6 can only be used in cassette 1.
** To change to a media type other than Plain, refer to Paper
Weight on page 8-16.
L b
[ Login
Selectable Size/Type
1~8**
1
Press the System Menu/Counter key on the main unit
operation panel.
When you are performing user management and have
not logged in, a login screen will appear. Then, enter the
user ID and password to log in.
NOTE:
Refer to Character Entry Method on Appendix-5 for
]
details on entering characters.
2
In the Sys. Menu/Count. menu, press the
select [Common Settings].
2-48
Preparation before Use
or key to