Removing Routine Maintenance Items And Consumables; Transfer Roller Removal; Imaging Unit Removal; Fuser Removal - Xerox 6250DT - Phaser Color Laser Printer Service Manual

Removing Routine Maintenance Items and
Consumables
Routine Maintenance Items include the Transfer Roller, Imaging Unit, and Fuser
Assembly. The Paper Feed Rollers are also Routine Maintenance Items, but
individual procedures for their removal and replacement are provided on page 8-18
and page 8-36. Consumables consist of the four toner cartridges.

Transfer Roller Removal

Warning
If the printer has been in operation recently the Fuser may be hot. Be careful
when you release the latches on the Transfer Roller not to come into contact with
the hot Fuser.
1.
Power down the printer.
2.
Open Door A.
3.
Squeeze the latch at each end of the Transfer Roller and pivot the latch up.
4.
Lift the Transfer Roller out of the printer.

Imaging Unit Removal

1.
Power down the printer.
2.
Open Door A.
3.
Open Door C.
4.
Grasp the handle on the top of the Imaging Unit and lift it out of the printer.
5.
Place the Imaging Unit in a light proof bag or other light proof container.
Caution
Leaving the Imaging Unit exposed to light for periods in excess of a few minutes
can quickly degrade its performance and result in early failure.

Fuser Removal

Warning
The Fuser may be hot. Turn off power and allow at least 5 minutes for the Fuser
to cool before removal.
1.
Power down the printer.
8-4 Phaser 6250 Color Laser Printer Service Manual