Exit Roller (Pl 7.1.4) - Xerox 6250DT - Phaser Color Laser Printer Service Manual

Exit Roller (PL 7.1.4)

1. Remove the Chute Assembly Exit (page 8-62).
2.
Release the tab securing the Gear Roll (item #1) to the shaft and remove the Gear
Roll.
3.
Remove the bearing from the left side of the shaft of the Exit Roller (item #2).
4.
Remove the e-ring securing the right end of the shaft of the Exit Roller.
5.
Remove the bearing (item #3).
6.
Raise the right side of the shaft and pull the Exit Roller to the right and up to
remove.
RIGHT
3
Service Parts Disassembly
2
4
1
LEFT
6250-194
8-63