Service Terms; Manual Terms - Xerox 6250DT - Phaser Color Laser Printer Service Manual

Service Terms

Manual Terms

Various terms are used throughout this manual to either provide additional
information on a specific topic or to warn of possible danger present during a
procedure or action. Be aware of all symbols and terms when they are used, and
always read NOTE, CAUTION, and WARNING statements.
Common Acronyms:
The following list defines the acronyms that may be fournd in this manual.
ADC:
Automatic Density Control
BTR:
Bias Transfer Roller
CRUM:
Customer Replaceable Unit
Monitor
CTD: Toner Density Control
DRV:
Motor Driver Board
ESD:
Electrostatic Discharge
IDT:
Intermediate Transfer Unit
Note
A note indicates an operating or maintenance procedure, practice or condition
that is neccessary to efficiently accomplish a task.
A note can provide additional information related to a specific subject or add a
comment on the results achieved through a previous action.
Caution
A caution indicates an operating or maintenance procedure, practice or condition
that, if not strictly observed, results in damage to, or destruction of, equipment.
Warning
A warning indicates an operating or maintenance procedure, practice or
condition that, if not strictly observed, results in injury or loss of life.
Product Terms
Caution:
A personal injury hazard exists that may not be apparent. For example, a
panel may cover the hazardous area.
Danger:
A personal injury hazard exists in the area where you see the sign.
iv
MCU:
Engine Control Board
NCS:
Non-Contact Sensor
PHD:
Imaging Unit
PL: Corresponds to the FRU Parts List.
RMI:
Routine Maintenance Item
ROS:
Laser Scanning Unit
RTC:
Charge Roller
Phaser 6250 Color Printer