Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
Insert the EasyBUILD 7.1 build 100 into the optical drive.
3.
Expand Drivers -> Altos R910 -> Graphics adapters -> ATI Radeon 7000,
4.
select Windows 2000 Advanced Server and click on Setup.
Follow the instruction to install the VGA driver and reboot the server
5.
after the driver is installed.
SCSI Backplane Driver Installation
There is a ESG-SHV SCA HSBP M34 SCSI Processor Device listed under
1.
Other device in Windows Device Manager. It is the hot-swap SCSI
backplane for R910.
Right-click on the ESG-SHV SCA HSBP M34 SCSI Processor Device and select
2.
Properties.
Select Driver tab and click on Update Driver.
3.
Follow the instructions. Select Search for a suitable driver for my device
4.
(Recommended) and click on Next.
Check on the Specify a location and click on Next to specify the path for
5.
the driver. Please refer to the Directory on EasyBUILD 7.1 build 100 for
HSBP driver in Driver required section.
Follow the instructions to finish the installation.
6.
Intel RAID Web Console Utility Installation
Please insert the EasyBUILD 7.1 build 100 into the optical drive.
1.
Expand Utilities -> Altos R910 -> Integrated SCSI Hardware RAID, select
2.
Intel RAID WebConsoel (Windows 2000 Advanced Server) and click on
Setup.
Follow the instruction to install the Intel RAID Web Console Utility.
3.
At Installation Options, please select Standalone.
4.
At Setup, please use the default setting.
5.
The Intel RAID Web Console Utility needs the Java Runtime Environment
6.
(JRE) version 1.3.1 at least. The setup will detect for the JER automatically.
If you do not install the JRE in advance, please click on continue and the
setup will install the JRE version 1.4.2 for you.
Follow the instruction to complete the installation.
7.
For using the Intel RAID Web Console Utility, please launch the web
8.
browser and link to http://localhost:3570.
Broadcom Advanced Control Suite Utility Installation
Please insert the EasyBUILD 7.1 build 100 into the optical drive.
1.
Expand Utility -> Altos R910 -> Broadcom Ethernet Adapters, select BACS
2.
28
Advertisement
Table of Contents
