Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
SCSI controller
Onboard Broadcom
BCM5704 Gigabit
Ethernet
Onboard USB 2.0
Hot-swap
backplane
Installation Tips
NOTE. There is no built-in driver for integrated SAS in the SuSE Linux Enterprise
Server 9 EM64T Service Pack 3. You need an external USB floppy drive for
applying driver during the OS installation.
Since SUSE Linux Enterprise Server 9 EM64T Service Pack 3 cannot
1.
recognize the integrated, you need to make a driver diskette from the
EasyBUILD 7.1 build 300 first before the installation.
Boot the system form SUSE Linux Enterprise Server 9 EM64T Service Pack3
2.
bootable CD.
When you see the boot menu on the screen, select Installation, press F6
3.
then press Enter to continue.
Follow the instruction to load the integrated SAS driver from the driver
4.
diskette.
Follow the instructions to change the installation and service pack CDs
5.
during the installation. And follow the normal installation procedure to
complete the installation.
SCO OpenServer 6.0.0 Installation (with Integrated SAS
hardware RAID)
Below information describes how to manually install SCO OpenServer 6.0.0 on
Altos R910 with integrated SAS hardware RAID.
Drivers Required
For SCO OpenServer 6.0.0 Installation, the following device drivers are
required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Integrated SAS
hardware RAID
60
SAS driver
3.37
Built-in
N/A
Built-in
N/A
Built-in
Version
Directory on EasyBUILD
N/A
Built-in
N/A
Built-in
1.0
You can find the driver at SCO
website.
http://www.sco.com/support/update/
download/release.php?rid=219
Advertisement
Table of Contents
