Table of Contents
Advertisement
Installation Tips
Since the SuSE Linux Enterprise Server 9.0 SP3 could detected the
1.
integrated SCSI hardware RAID automatically, just boot the system form
SuSE Linux Enterprise Server 9 Service Pack3 bootable CD.
When you see the boot menu on the screen, select Installation to
2.
continue.
Follow the instructions to change the installation and service pack CDs
3.
during the installation. And follow the normal installation procedure to
complete the installation.
Intel RAID Web Console Utility Installation
1.
Insert the EasyBUILD 7.1 b100 and open the folder
/app/r910/romb/IntelRAIDWebConsole/linux on DVD.
2.
Execute the RAID_Web_Console_Linux.bin to launch the graphic
installation wizard.
3.
At Installation Options, please select Standalone.
4.
Follow the instruction to finish the installation.
5.
For using the Intel RAID Web Console Utility, please launch the web
browser and link to http://localhost:3570.
SUSE Linux Enterprise Server 9 Service Pack 3 Installation (with
onboard LSI SCSI)
Below information describes how to manually install SUSE Linux Enterprise
Server 9 Service Pack 3 on Altos R910 with onboard LSI SCSI.
Drivers Required
For SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the following
device drivers are required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Onboard LSI 1030
SCSI controller
Onboard Broadcom
BCM5704 Gigabit
Ethernet
Onboard USB 2.0
Hot-swap
backplane
51
Version
Directory on EasyBUILD
N/A
Built-in
N/A
Built-in
3.02.62suse
Built-in
3.37
Built-in
N/A
Built-in
N/A
Built-in
Altos R910 Installation Configuration Guide
Advertisement
Table of Contents
