Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
select Update Driver.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
location in the search.
Click on Browse and specify the path for the driver. Please refer to the
6.
Directory on EasyBUILD 7.1 build 300 for Hot-swap backplane driver in
Driver required section.
Click on Next and follow the instruction to finish the driver update.
7.
After installing the driver, you would see Intel (r) SCA Hotswap Backplane
8.
listed in System devices.
VGA Driver Installation
The VGA driver installation is the same as integrated SCSI hardware RAID
enabled. Please refer to the Windows Server 2003 Enterprise x64 Edition (with
Integrated SCSI Hardware RAID) VGA Driver Installation section.
Gigabit Ethernet Driver Installation
The Gigabit Ethernet driver installation is the same as integrated SCSI hardware
RAID enabled. Please refer to the Windows Server 2003 Enterprise x64 Edition
(with Integrated SCSI Hardware RAID) Gigabit Ethernet Driver Installation
section.
Intel RAID Web Console 2 Installation
Please insert the EasyBUILD 7.1 build 300 into the optical drive.
1.
Expand Utilities -> Altos R910 -> Integrated SAS Hardware RAID, select
2.
Intel RAID Web Console 2 and click on Setup.
Follow the instruction, accept the license agreement and use the default
3.
setting to the Setup Type.
At the Setup Type, please select StandAlone.
4.
Follow the instruction again to complete the installation.
5.
Broadcom Advanced Control Suite Utility Installation
The Broadcom Advanced Control Suite Utility installation is the same as
integrated SCSI hardware RAID enabled. Please refer to the Windows Server
2003 Enterprise x64 Edition (with Integrated SCSI Hardware RAID) Broadcom
Advanced Control Suite Installation section.
14
Advertisement
Table of Contents
