Table of Contents
Advertisement
Altos R920 Installation Configuration Guide
IOAT driver in Driver required section.
7.
Click on Next and follow the instruction to finish the
driver update.
8.
After installing the driver, you would see Intel(R) 7300
Chipset QuickData Technology Device – 360B listed in
System devices.
SAS Backplane Driver Installation
1.
There is an ESG-SHV, SCA HSBP M12.... SCSI Enclosure
Device listed under Other device in Windows Device
Manager. It is the hot-swap SAS backplane for R920.
2.
Right-click on the ESG-SHV, SCA HSBP M12.... SCSI
Enclosure Device and select Update Driver.
3.
Select No, not this time. Do not connect to Windows
Update to search the driver.
4.
Select Install from a list or specific location
(Advanced).
5.
Select Search the best driver these locations and check
Include this location in the search.
6.
Click on Browse and specify the path for the driver.
Please refer to the EasyBUILD Version 8.0 build 100 for
Hot-swap backplane driver in Driver required section.
7.
Click on Next and follow the instruction to finish the
driver update.
8.
After installing the driver, you would see Intel (r) SCA
Hotswap Backplane listed in System devices.
TPM Driver Installation
1.
For Unknown Device listed under Other device in Windows
Device Manager, it should be the TPM device. You could
find the driver in EasyBUILD 8.0 build 100.
2.
Right-click on the Unknown Device and select Update
Driver.
3.
Select No, not this time. Do not connect to Windows
Update to search the driver.
4.
Select Install from a list or specific location
(Advanced).
5.
Select Search the best driver these locations and check
Include this location in the search.
18
Advertisement
Table of Contents
