Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
Integrated SCSI
hardware RAID
Onboard Broadcom
BCM5704 Gigabit
Ethernet
Onboard USB 2.0
Hot-swap
backplane
Software Required
The management utility of integrated SCSI hardware RAID and onboard NIC
can be found in the EasyBUILD 7.1 build 100 (or later).
Software
Intel RAID Web
Console
Broadcom
Advanced Control
Suite
Microsoft DirectX
Configuring Integrated SCSI Hardware RAID
Please refer to the Appendix A. for the Integrated SCSI hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver for Integrated SCSI hardware RAID in the OS.
You need an USB floppy for applying driver during the OS installation.
As Windows 2000 can't recognize the integrated SCSI hardware RAID, you
1.
need to make a driver diskette from the EasyBUILD 7.1 build 100 first
before the installation.
Press F6 at the start of installation to provide the driver diskette.
2.
Select "Intel (R) RAID Controllers For Windows 2000" as target driver
3.
After loading the RAID driver from diskette, follow the normal procedure
4.
to finish the installation.
Chipset Driver Installation
After the installation is completed, you would see the following other
1.
devices listed in Device Manager.
26
5.49.0.0
\Disk\R910\onboard\romb\romb.w2k
8.93.1.0
\Disk\R910\NIC\BCM\bcm_5704.w2k
7.2.2.1001
The USB 2.0 driver is in the same
package with chipset driver.
5.0.2195.1
\Disk\R910\onboard\HSBP
Version
Directory on EasyBUILD
2.8-00
\app\r910\romb\IntelRAIDWebConsol
e\windows
7.7.6
\app\r910\NIC\BACS\2KXPWS03
8.0 or later
http://www.microsoft.com/windows/d
irectx/default.mspx
Advertisement
Table of Contents
